|
|
|
|
|
|
BrassCraft PSSD-41 Gas Ball Valve, 1/2 in Connection, Flared x FIP, 5 psi Pressure, Brass Body
|
|
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
|
|
|
|
|
|
|
|
|
B & K ProLine Series 110-223HC Gas Ball Valve, 1/2 in Connection, FPT, 200 psi Pressure, Manual Actuator, Brass Body
|
|
|
Two-piece body. Multi-directional flow, chrome-plated brass ball, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL listed. Threaded ends comply with ANSI B1.20.1. -20 to 300 deg F temperature range, quarter turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
|
|
|
|
|
|
|
|
|
|
B & K ProLine Series 110-522HC Gas Ball Valve, 3/8 in Connection, FPT, 200 psi Pressure, Manual Actuator, Brass Body
|
|
|
Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
|
|
|
|
|
|
|
|
|
B & K 117-592 Gas Ball Valve, 9/16 x 1/2 in Connection, Flare x FPT, 200 psi Pressure, Manual Actuator, Brass Body
|
|
|
Forged brass 1-piece body. Chrome-plated forged brass ball. Coated aluminum handle. 9/16-24 fine thread flare for 3/8 in tube. Threaded ends comply with ANSI B1.20.1. CSA certified, CSA- 3-88 certified. Threaded flare ends comply with SAE F513. UPC coded bulk.
|
|
|
|
|
|
|
|
|
|
BrassCraft PSSL-12 Gas Ball Valve, 3/8 x 1/2 in Connection, Flared x FIP, 5 psi Pressure, Brass Body
|
|
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
|
|
|
|
|
|
|
|
|
B & K ProLine Series 110-523HC Gas Ball Valve, 1/2 in Connection, FPT, 200 psi Pressure, Manual Actuator, Brass Body
|
|
|
Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
|
|
|
|
|
|
|
|
|
B & K ProLine Series 110-524HC Gas Ball Valve, 3/4 in Connection, FPT, 200 psi Pressure, Manual Actuator, Brass Body
|
|
|
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
|
|
|
|
|
|
|
|
|
BrassCraft PSBV503-8 Gas Ball Valve, 1/2 in Connection, FIP, 5 psi Pressure, Brass Body
|
|
|
Gas appliance connector with lever handle. AGA Design certified.
|
|
|
|
|
|
|
|
|
|
BrassCraft TBVF8 Gas Ball Valve, 1/2 in Connection, Flared, 5 psi Pressure, Brass Body
|
|
|
BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be installed in the gas line run of copper tubing. Requires a 1/2 in OD flare nut to install.
|
|
|
|
|
|
|
|
|
|
BrassCraft PSSC-60 Gas Ball Valve, 5/8 x 3/4 in Connection, Flared x FIP, 5 psi Pressure, Brass Body
|
|
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
|
|
|
