|
|
|
|
|
|
TPI TBS Thermostat Kit, Built-In, Single Pole, Bi-Metal, White/Ivory
|
|
|
The thermostat plate is what gives it the color. A matching plate is sent with each baseboard heater purchased, which is separate from the thermostat. If they order a white heater, then a white plate is sent that is made to fit over a TBD Thermostat. If they order an ivory baseboard heater, an ivory plate is sent. A single pole thermostat operates off one circuit, this means the power to the unit can only operate in one direction or electrical current. Because of this the single pole thermostat cannot be turned off, but only turned down.
|
|
|
|
|
|
|
|
|
|
TPI 4300PW Wallplate Adapter, White
|
|
|
Adapter plate allows replacement of all CB Series and MW Series heaters. Opening 14-3/4 in x 6-3/4 in. Overall 21-1/2 in x 12-1/4 in.
|
|
|
|
|
|
|
|
|
|
TPI S2022 Thermostat, Single-Pole, White
|
|
|
Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Single Pole: breaks one side of the line. Rated 20 A, 120/240 VAC. Adjustable range 50 to 90 deg F. Recommended for all 120 V units. Mount in standard deep receptacle box. U.L. Listed.
|
|
|
|
|
|
|
|
|
|
TPI TBD Thermostat Kit, Built-In, Bi-Metal, White/Ivory
|
|
|
A double pole thermostat is wired directly to the main circuit breaker but will have four wires instead of two. This allows for the thermostat to operate on two separate circuits. Double pole thermostats have an "off" button and can cut off power completely to the heater, even if the temperature drops below the set temperature.
|
|
|
|
|
|
|
|
|
|
TPI 2900S Series H2905-028S Baseboard Heater, 2.1/1.8 A, 208/240 V, 1706/1275 Btu/hr BTU, Ivory
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
TPI 2900S Series H2905-028SW Baseboard Heater, 2.1/1.8 A, 208/240 V, 1706/1275 Btu/hr BTU, White
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
TPI D2022 Thermostat, White
|
|
|
Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Double pole, both sides of the line are disconnected in the off position. Recommended for all 240 V units and for additional safety with 120 V units. Mount in standard deep receptacle box. UL listed.
|
|
|
|
|
|
|
|
|
|
TPI 2900S Series H2910-048S Baseboard Heater, 4.2/3.6 A, 208/240 V, 3413/2550 Btu/hr BTU, Ivory
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
TPI 2900S Series H2912-060S Baseboard Heater, 5.2/4.5 A, 208/240 V, 4250/3189 Btu/hr BTU, Ivory
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
|
|
|
|
|
|
TPI 2900S Series H2910-048SW Baseboard Heater, 4.2/3.6 A, 208/240 V, 3413/2550 Btu/hr BTU, White
|
|
|
Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.
|
|
|
|
