|
|
|
|
|
|
Vulcan JL-NP018 Diagonal Cutting Plier, 4.5 in OAL, 0.4 mm Cutting Capacity, 0.25 in Jaw Opening, Black/Blue Handle
|
|
|
This Vulcan diagonal cutting plier is made of carbon steel with a polished jaw finish. It has comfortable non-slip grip handle.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-104 Diagonal Cutting Plier, 5-3/4 in OAL, 1/3 in Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-027 Diagonal Cutting Plier, 6 in OAL, Ergonomic Handle, 53/64 in W Jaw, 15/16 in L Jaw
|
|
|
The 6 in diagonal pliers are comfortable and durable. Its bi-material handle helps you grip the tool more comfortably. With a fixed joint design, induction hardened jaws for a tool that stays sharp and a body made of drop-forged steel, this tool is indispensable for your tool box, work bench or tool belt.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-105 Diagonal Cutting Plier, 6-3/16 in OAL, 25 mm Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-108 Diagonal Cutting Plier, 7-5/16 in OAL, 7/8 in Cutting Capacity, Black Handle, Double Dipped Handle
|
|
|
Made of forged steel with hardened cutting edges for durability and a rust-resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Irwin 2078306 Diagonal Cutting Plier, 6 in OAL, 13/16 in Jaw Opening, Blue/Yellow Handle, Cushion-Grip Handle
|
|
|
Made of durable nickel chromium steel with induction hardened cutting edge stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
|
|
|
|
|
|
|
|
|
|
Crescent Pro Series PS5429C Cutting Plier, 8 in OAL, 11 AWG Cutting Capacity, Blue/Gray Handle, Ergonomic Handle
|
|
|
Made of chrome vanadium steel for increased durability, heat-treated joint rivet for smooth and consistent operation and induction hardened edges for long cutting life. Standard edge with 11 AWG cut capacity. Compound leverage design that increases cutting power by 50% and is 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort.
|
|
|
|
|
|
|
|
|
|
STANLEY 89-858 Diagonal Cutting Plier, 6 in OAL, 13/16 in Cutting Capacity, Black Handle, Slip-Resistant Handle
|
|
|
Made of drop forged steel with 33% larger cutting edge that requires 45% less cutting effort. Cuts wire and other thin materials. Comfortable bi-material grip.
|
|
|
|
|
|
|
|
|
|
Irwin 2078308 Diagonal Cutting Plier, 8 in OAL, 1-1/8 in Jaw Opening, Blue/Yellow Handle, Cushion-Grip Handle
|
|
|
Made of nickel chromium steel with right angle teeth grip in all directions for maximum bit. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-22-6107 Diagonal Cutting Plier, 7 in OAL, 11/32 in Cutting Capacity, 1.13 in Jaw Opening, Red Handle
|
|
|
The Milwaukee 7 in comfort grip diagonal cutting pliers feature iron carbide edge hardened cutting edges for up to 2X more cuts and a tapered nose with flush cutting blades, which cut all the way to the tip. The plier's head features integrated reaming ridges (patent pending) for removing burrs from the inside of smooth pipe. For added functionality, the Milwaukee 7 in diagonal cutting pliers feature an integrated fish tape puller. Milwaukee pliers feature over-molded comfort grips, which will not peel under jobsite conditions. All Milwaukee pliers are forged for strength and feature rust protection for long life.
|
|
|
|
