|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Eaveguard HE351AA936 Shingle Starter Strip, Solid
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
Eaveguard? Start-R-Roll is specifically designed to provide a protective waterproof base beneath the first course of shingles. Its zip strip seals down shingle tabs to protect against wind lift-up. It can be used for roof flashing and gutter repairs.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Master Flow NMM50 Moss and Mildew Preventer, 50 ft L, 2.67 in W
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
EPA approved. Installs easily near the roof ridge. For composition shingle, shake or tile roofs (bend strips to conform to the shape of the tile). For long-lasting protection.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Eaveguard HE740915 Roofing Underlayment, 33.3 ft L, 3 ft W, Asphalt
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
Henry? Eaveguard? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Eaveguard HE740916 Roofing Underlayment, 65 ft L, 3 ft W, Asphalt
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
Henry? Eaveguard? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Interwrap RHINOROOF Roof Underlayment Roll, 286 ft L, 42 in W, Synthetic, Gray
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
A replacement for #15 or #30 oil saturated felt, designed for steep slope roofing under asphalt shingles, synthetic shingles, residential metal roofing and cedar shakes, 12 times stronger than #30 felt, meets and exceeds ASTM D226 Types I & II and D4689 Types II & IV, 8 square more per roll compared to #30 felt, easier to install - wider, lighter and more coverage per lap, synthetic construction is impervious to mold, lays flat and does not absorb water and wrinkle, enhanced UV protection, no oil leaching, no hazardous material content, fiber grip slip-resistant walking surface, advanced backside non-slip coating, low temperature flexibility. Roll size of 10 sq or 93 sq-m.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Stinger 342970 Synthetic Felt, 250 ft L, 48 in W, Polyester
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
7 mil thickness. Meets ICC-ES-ESR-3905 standard. UV-resistant. Can be exposed for up to 6 months. 10 sq Roll size. Made in USA.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Stinger 342973 Synthetic Felt, 250 ft L, 48 in W
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
7 mil thickness, meets ICC-ES-ESR-3905 standard. UV-resistant. Can be exposed for up to 6 months. Roll size: 10 sq. Made in USA.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
GAF 0915000MV Roofing Leak Barrier, 66.7 ft L, 36 in W, Fiberglass, Black
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
Smooth, film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release film peels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. High temperature compound is suitable for most metal roof applications. For application under copper and zinc. Passes low temperature flexibility (-20 deg) and waterproof integrity after low temperature flexibility requirements. Can be exposed for up to 60 days if necessary.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
Henry HERF200916 Roofing Underlayment, 65 ft L, 3 ft W, Polyethylene, Blue
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
A SBS modified bitumen high temperature roofing underlayment reinforced with a textured skid-resistant polyethylene film specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile, self-seals when penetrated by mechanical fasteners or roofing nails prevents lateral moisture migration; provides premium anti-resistant textured blue film surface for applicator safety provides split release backing for fast application meets ASTM D1970 standard and is ICC listed.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |
MFM 48267 Roofing Underlayment, 67 ft L, 36 in W, Polymer, White
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif)
Ultra HT Wind & Water Seal? is a 45 mil, self-adhering roofing underlayment composed of a white, non-slip, cross-laminated polymer film, laminated to a high temperature rubberized aggressive asphalt adhesive. Product is engineered for whole roof protection under shingle, tile, shake and metal roofing systems. It bonds to the substrate and seals around fasteners to limit damage caused by water penetration or leaks. It is ideal for secondary water resistance with proper roof ventilation. Product comes with a split release liner for easy installation in valleys, ridges and around chimneys.
|
|
![](/v/vspfiles/templates/stevenson/images/clear1x1.gif) |