|
|
|
|
|
|
Simmons 450-5 Relief Valve, 1/2 in
|
|
|
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
|
|
|
|
|
|
|
|
|
|
SharkBite EB75 Series 23000-0045 Pressure Regulating Valve, 3/4 in Connection, FPT, Iron Body
|
|
|
The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment range of 10 to 70 psi. The valve also comes in a low-pressure range of 0-20 psi.
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23883-0045 Pressure Regulating Valve, 3/4 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23882-0045 Pressure Regulating Valve, 1/2 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23155-0045 Pressure Regulating Valve, 1 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
Apollo 69ELF114 Reducing Valve, 3/4 in, FNPT, Bronze Body
|
|
|
Apollo Reducing Valve, Nominal Size: 3/4 in, FNPT Connection, Operating Pressure: 400 psi, Media: Water, Body Material: Bronze, Dimensions: 3-5/8 in W x 5-1/2 in H, Temperature Rating: 180 deg F
|
|
|
|
|
|
|
|
|
|
Apollo APXPRV34WG Pressure Reducing Valve with Gauge, 3/4 in Connection, PEX Barb, 15 to 75 psi Regulating, 27 gpm
|
|
|
The Apollo 3/4 in bronze double union water pressure regulator with gauge sets a new standard in water pressure regulation. It is designed to reduce incoming water pressures to a safe level to protect plumbing fixtures and appliances. With simple adjustability and an instant read, color-coded dial to provide downstream pressure measurement, this valve solves all of the annoyances of pressure regulators from the past. It also assists in the control of pressure surges from entering the structure from the water main to further protect fixtures and appliances. Excessive high pressure within a plumbing system can cause damage over time. A pressure regulator should be installed after the main line to help protect plumbing. Featuring a superior flow rate, durable bronze construction and fitted with either Apollo PEX, Apollo expansion PEX brass barb unions or Tectite by Apollo push-to-connect ends, the 36ELF can be easily integrated into any piping system.
|
|
|
|
|
|
|
|
|
|
Watts 3/4 LFN45BM1-U Pressure Reducing Valve, 3/4 in, NPT x NPT Female, Silicone Alloy Body
|
|
|
Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa).
|
|
|
|
|
|
|
|
|
|
SharkBite EB25 Series 22263-0045 Pressure Regulating Valve, 3/4 in Connection, NPT, Stainless Steel Body
|
|
|
The EB-25 SS from Cash Acme brings state-of-the-art water control technology to pressure regulators. This version of the EB-25 boasts all of the features of the original, while providing the new benefit of stainless steel internals and 100% lead-free materials of construction. The EB-25 has a convenient orange pressure adjustment twist-cap and numerical indicator which makes installation a quick, one-man job. The unique design also eliminates the water whistle or hum associated with most PRVs, due to innovative "micro-fingers" that dissipate noise as water flows across the seat. Patented single-cartridge design of this valve has fewer parts for increased reliability and can be serviced without having to remove the valve body. While pressure reduction is an everyday need necessary to protect appliances and plumbing fixtures, the advanced water control technology of the EB-25 provides unique new benefits to this common application. The biggest breakthrough is the simple numerical indicator that allows the exact desired pressure to be set even before the valve is installed. Once installed, patented design features mean the EB-25 offers improved reliability and easier access for maintenance. The EB-25 is lead-free and intended for use where supply line pressure does not exceed 300 psi. These valves are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 20 to 90 psi without changing the spring. The EB-25 is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
Watts 0950001 Pressure Regulating Valve, 1/2 in Connection
|
|
|
This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body with union solder inlet and NPT threaded outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless-steel strainer. It has high-capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).
|
|
|
|
