|
|
|
|
|
|
Crescent Nicholson 04795N/04795 Hand File
|
|
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 18924NN Hand File
|
|
|
Half round shape and has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 04896N/04896 Hand File
|
|
|
Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 19136N Rasp, Tang Handle
|
|
|
For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 05094N Hand File, Half-Round Profile, American Pattern, Bastard, Double Cut, 12 in L Blade
|
|
|
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is perfect for use on concave, convex and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 17903N Horse Rasp
|
|
|
Plain horse rasps are double-ended with rasp teeth on one side, file teeth on opposite side, rectangular shape. Thin fine-toothed rasp for shoeing racetrack, riding horses and ponies.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 19460N/19460 Horse Rasp, Tang Handle
|
|
|
Single cut file teeth on edge for use on wood and soft metals. Used by woodworkers, hobbyists and plumbers.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 18130N Horse Rasp
|
|
|
Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut? file pattern that are narrow chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, rectangular shape, tooth cuts deeper to last longer.
|
|
|
|
|
|
|
|
|
|
File Taper Saw 6in Slim Sngcut - Case of 12
|
|
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
|
|
|
|
|
|
|
File Taper Saw 6 Inch Xxslim - Case of 12
|
|
|
Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.
|
|
|
|
